Date shown in New York time. Confirm application timing on the official posting.
RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time (e.g., Program Analyst, GS-343-11 | January 2009–Present | 40 Hours/Week) and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to TRANSCRIPTS are REQUIRED as there is a stated education requirement for the series. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager. For more information, please review the OPM Employee's Guide to Career Transition. SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents by the closing date of the announcement. Note: You must review and verify that all files are successfully transferred to our system before final submission.
SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents no later than 11:59 (EST) by the closing date of the announcement. Note: Uploading documents to USAJobs does not automatically attach them to this application. You must review and verify that all files are successfully transferred to our system before final submission. Late or incomplete applications will be disqualified. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
Confirm the deadline and all requirements on the official posting before applying.
Source: USAJOBS · Bespree is not the employer.
The position is in a Federal Highway Administration (FHWA) Federal-aid Division or Federal Lands Highway Division Office. The Civil Engineer (Highway) assists in managing and promoting assigned Federal Highway Programs within the state or, as a shared resource, in multiple states. Provides engineering stewardship and oversight at various junctures of project and program delivery of FHWA infrastructure projects within the state(s)/region.
FHWA's PDP is an entry-level/new employee program designed to introduce participants to the technical, administrative, and program management aspects of administering the Federal-aid Highway and Federal Lands Highway Programs. The PDP is up to 24-months of entry-level career development training for participants to learn and apply technical skills to advance. The Federal Aid Highway Program supports state highway systems by providing financial assistance for the construction, maintenance, and operations of the nation's 3.9-million-mile highway network. This includes the Interstate Highway System as well as primary highways and secondary, local roads. FHWA is charged with implementing the Federal Aid Highway Program in cooperation with state and local governments. The mission of the Federal Lands Program is to improve transportation to and within Federal and Tribal Lands by providing technical services to the highway/transportation community as well as building accessible and scenic roads that ensure the many national treasures within our nation's Federal Lands can be enjoyed by all. As a Civil Engineer (Highway), you will: Immerse in experiential learning in both FHWA's Federal Aid and Federal Lands Highway Division Offices, where you will receive on-the-job training through a structured set of learning experiences described in a development plan. Several developmental assignment options may include one or more of the following: design, construction, project development, environment, safety, pavements, materials, research, Intelligent Transportation System, bridge, traffic operations, hydraulics, preventive maintenance, access management, utilities, and right-of-way, planning, surveys, geotechnical, value engineering, among others. The ideal candidate for this position is an entry to beginning level technical engineer who has a desire to learn about the various aspects of technical highway engineering, including but not limited to, highway design, construction, bridge, geotechnical, survey and mapping, hydraulics and materials testing. The ideal candidate should have between 0 to 5 years of experience, be mobile and willing to travel to remote locations for extended periods of time and be able to work independently and in a team environment.
To meet the minimum qualifications for this position, you must (1) meet the Education Requirement for the series, (2) provide a copy of transcripts for verification, AND (3) meet either the education or experience qualifications for the grade at which you are requesting consideration. To qualify for the GS-07 on Experience, you must have at least one year of experience equal or equivalent to the GS-05 it must include: Experience reviewing engineering regulations or policies. Experience applying civil engineering principles and practical concepts related to highway road and system structures, transportation systems, traffic engineering, and modeling. Experience conducting analyses to support conclusions or recommendations. To qualify for the GS-07 on Education alone, you must have at least 1 year of graduate-level education OR superior academic achievement* at the baccalaureate level in an engineering program. *Superior Academic Achievement is based on (1) class standing, (2) grade-point average, or (3) honor society membership. To be creditable under this provision, superior academic achievement must have been gained in a curriculum that is qualifying for the position to be filled. 1. Class standing -- Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses. 2. Grade-point average (G.P.A.) -- Applicants must have a grade-point average of: 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on their official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum. You can also qualify based on a combination of graduate level education and experience. This must be fully supported by your resume and transcripts, provided with your application. To qualify for the GS-09 on Experience, you must have at least one year of experience equal or equivalent to the GS-07 it must include: Experience reviewing engineering design standards and regulations. Experience conducting analytical investigations using the scientific method, modeling, and computational analyses. Experience articulating information through various platforms such as discussions, meetings, fact sheets, reports, design documentation, briefings, and presentations. To qualify for the GS-09 on Education alone, you must have 2 years of progressively higher level graduate education leading to a master's degree or have been awarded a master's or equivalent graduate degree. You can also qualify based on a combination of graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Civil Engineering - Knowledge of the concepts, principles, theories, and methods required to plan, design, construct, operate, and maintain facilities such as buildings, transportation systems, water and sanitary systems, and other public works systems. Transportation Engineering - Knowledge of concepts, principles, theories, and methods applicable to planning, designing, and constructing transportation systems, including traffic analysis, signal analysis, highway capacity, pavement design, bridge construction, planning of transportation projects, environmental analysis of transportation facilities, and transportation network analysis. Written Communication - Writes in a clear, concise, organized, and convincing manner for the intended audience. Oral Communication - Expresses information (for example, ideas or facts) to individuals or groups effectively, considering the audience and nature of the information (for example, technical, sensitive, controversial); makes clear and convincing oral presentations; listens to others, attends to nonverbal clues, and responds appropriately. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/ Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
CONDITIONS OF EMPLOYMENT: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service. GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only. BACKGROUND INVESTIGATION: You may be required to complete a background/security investigation and meet preliminary requirements prior to onboarding. PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required. PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed). MOBILITY AGREEMENT: Appointees will be required to sign a Mobility Agreement. If you decline a position due to geographic location, you will receive no further consideration under this announcement. This agreement states that as a part of your developmental assignment, you may be assigned to any location within the Agency, and that you will move to the new duty location. Failure to relocate can be used as the basis for non-selection and failure to relocate after completion of your Individual Development Plan (IDP) can be the basis for your termination from the Federal service. SERVICE AGREEMENT: Appointees will be required to sign an agreement to continue in service upon completion of the development training and serve in the agency twice the length of the training period (approximately 24 months).
All applicants must meet the requirements under A or B to qualify for applying to an engineering position. A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive). Note: Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
Little Rock, Arkansas
Phoenix, Arizona
Lakewood, Colorado
Washington, District of Columbia
Augusta, Maine
Lansing, Michigan
Bismarck, North Dakota
Trenton, New Jersey
Carson City, Nevada
Columbus, Ohio
Salem, Oregon
Harrisburg, Pennsylvania
Austin, Texas
Salt Lake City, Utah
Olympia, Washington
Vancouver, Washington
Full Time
For this announcement, applications will be reviewed to determine if the applicant meets the basic qualifications for this position. The applications of individuals who meet the basic qualifications will be assessed to validate that the applicant possesses the Knowledge, Skills, and Abilities (KSAs) at the level of proficiency needed to perform the job successfully. Applicants who are found to possess the necessary KSAs to perform the job may be referred to the selecting official for further consideration. This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. You may preview questions for this vacancy.
RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time (e.g., Program Analyst, GS-343-11 | January 2009–Present | 40 Hours/Week) and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to TRANSCRIPTS are REQUIRED as there is a stated education requirement for the series. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager. For more information, please review the OPM Employee's Guide to Career Transition. SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents by the closing date of the announcement. Note: You must review and verify that all files are successfully transferred to our system before final submission.
SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents no later than 11:59 (EST) by the closing date of the announcement. Note: Uploading documents to USAJobs does not automatically attach them to this application. You must review and verify that all files are successfully transferred to our system before final submission. Late or incomplete applications will be disqualified. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, FairChanceAct@dot.gov. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation CURRENT OR FORMER FEDERAL APPLICANTS: You must submit SF-50(s) that verify your highest competitive grade, full performance level, and federal applicant eligibility. To prove you meet the 52-week time-in-grade requirement for the highest grade level requested, you must submit SF-50 documentation showing a sequential 52-week period. Box 4 of the SF-50 must show an effective date at least 52 weeks prior to the job announcement closing date. Do not submit an award SF-50 or a current-year pay adjustment SF-50, as these generally do not verify grade, eligibility, or the full 52-week requirement. To ensure your application passes HR validation, you are highly encouraged to combine and upload the following required SF-50 documents into a single PDF: • The SF-50 showing when you were originally appointed or promoted to your qualifying grade level (establishing the start of your 52-week timeline) OR subsequent SF-50 (such as a Within-Grade Increase, promotion, or award) dated at least 52 weeks later. Warning on Incomplete Documentation: Submitting only an annual general pay adjustment SF-50 or an award SF-50 by itself is insufficient, as these individual documents do not track or prove your original entry date into that grade. If your documentation fails to conclusively prove a full 52-week history at the next lower grade, you will be rated Ineligible for that tier. The incumbent will be appointed to the GS-7, GS-9, or GS-11 level depending on qualifications. This position is developmental: Incumbents at the GS-7 or GS-9 may be non-competitively promoted to the next higher grade upon completion of an Individual Development Plan (IDP), meeting time-in-grade requirements, and the recommended approval for promotion by their supervisor. SALARY RANGES: The following salary table is used for Civil Eng (Hwy) series: 2026 Special Rate Table 0414 - https://www.opm.gov/special-rates/2026/Table041401012026.aspx RECRUITMENT INCENTIVE: Recruitment incentive may be considered.
The United States federal government offers civilian positions across its agencies and offices.
Date shown in New York time. Confirm application timing on the official posting.
RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time (e.g., Program Analyst, GS-343-11 | January 2009–Present | 40 Hours/Week) and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to TRANSCRIPTS are REQUIRED as there is a stated education requirement for the series. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager. For more information, please review the OPM Employee's Guide to Career Transition. SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents by the closing date of the announcement. Note: You must review and verify that all files are successfully transferred to our system before final submission.
SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents no later than 11:59 (EST) by the closing date of the announcement. Note: Uploading documents to USAJobs does not automatically attach them to this application. You must review and verify that all files are successfully transferred to our system before final submission. Late or incomplete applications will be disqualified. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
Confirm the deadline and all requirements on the official posting before applying.
Source: USAJOBS · Bespree is not the employer.
The position is in a Federal Highway Administration (FHWA) Federal-aid Division or Federal Lands Highway Division Office. The Civil Engineer (Highway) assists in managing and promoting assigned Federal Highway Programs within the state or, as a shared resource, in multiple states. Provides engineering stewardship and oversight at various junctures of project and program delivery of FHWA infrastructure projects within the state(s)/region.
FHWA's PDP is an entry-level/new employee program designed to introduce participants to the technical, administrative, and program management aspects of administering the Federal-aid Highway and Federal Lands Highway Programs. The PDP is up to 24-months of entry-level career development training for participants to learn and apply technical skills to advance. The Federal Aid Highway Program supports state highway systems by providing financial assistance for the construction, maintenance, and operations of the nation's 3.9-million-mile highway network. This includes the Interstate Highway System as well as primary highways and secondary, local roads. FHWA is charged with implementing the Federal Aid Highway Program in cooperation with state and local governments. The mission of the Federal Lands Program is to improve transportation to and within Federal and Tribal Lands by providing technical services to the highway/transportation community as well as building accessible and scenic roads that ensure the many national treasures within our nation's Federal Lands can be enjoyed by all. As a Civil Engineer (Highway), you will: Immerse in experiential learning in both FHWA's Federal Aid and Federal Lands Highway Division Offices, where you will receive on-the-job training through a structured set of learning experiences described in a development plan. Several developmental assignment options may include one or more of the following: design, construction, project development, environment, safety, pavements, materials, research, Intelligent Transportation System, bridge, traffic operations, hydraulics, preventive maintenance, access management, utilities, and right-of-way, planning, surveys, geotechnical, value engineering, among others. The ideal candidate for this position is an entry to beginning level technical engineer who has a desire to learn about the various aspects of technical highway engineering, including but not limited to, highway design, construction, bridge, geotechnical, survey and mapping, hydraulics and materials testing. The ideal candidate should have between 0 to 5 years of experience, be mobile and willing to travel to remote locations for extended periods of time and be able to work independently and in a team environment.
To meet the minimum qualifications for this position, you must (1) meet the Education Requirement for the series, (2) provide a copy of transcripts for verification, AND (3) meet either the education or experience qualifications for the grade at which you are requesting consideration. To qualify for the GS-07 on Experience, you must have at least one year of experience equal or equivalent to the GS-05 it must include: Experience reviewing engineering regulations or policies. Experience applying civil engineering principles and practical concepts related to highway road and system structures, transportation systems, traffic engineering, and modeling. Experience conducting analyses to support conclusions or recommendations. To qualify for the GS-07 on Education alone, you must have at least 1 year of graduate-level education OR superior academic achievement* at the baccalaureate level in an engineering program. *Superior Academic Achievement is based on (1) class standing, (2) grade-point average, or (3) honor society membership. To be creditable under this provision, superior academic achievement must have been gained in a curriculum that is qualifying for the position to be filled. 1. Class standing -- Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses. 2. Grade-point average (G.P.A.) -- Applicants must have a grade-point average of: 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on their official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum. You can also qualify based on a combination of graduate level education and experience. This must be fully supported by your resume and transcripts, provided with your application. To qualify for the GS-09 on Experience, you must have at least one year of experience equal or equivalent to the GS-07 it must include: Experience reviewing engineering design standards and regulations. Experience conducting analytical investigations using the scientific method, modeling, and computational analyses. Experience articulating information through various platforms such as discussions, meetings, fact sheets, reports, design documentation, briefings, and presentations. To qualify for the GS-09 on Education alone, you must have 2 years of progressively higher level graduate education leading to a master's degree or have been awarded a master's or equivalent graduate degree. You can also qualify based on a combination of graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Civil Engineering - Knowledge of the concepts, principles, theories, and methods required to plan, design, construct, operate, and maintain facilities such as buildings, transportation systems, water and sanitary systems, and other public works systems. Transportation Engineering - Knowledge of concepts, principles, theories, and methods applicable to planning, designing, and constructing transportation systems, including traffic analysis, signal analysis, highway capacity, pavement design, bridge construction, planning of transportation projects, environmental analysis of transportation facilities, and transportation network analysis. Written Communication - Writes in a clear, concise, organized, and convincing manner for the intended audience. Oral Communication - Expresses information (for example, ideas or facts) to individuals or groups effectively, considering the audience and nature of the information (for example, technical, sensitive, controversial); makes clear and convincing oral presentations; listens to others, attends to nonverbal clues, and responds appropriately. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/ Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
CONDITIONS OF EMPLOYMENT: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service. GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only. BACKGROUND INVESTIGATION: You may be required to complete a background/security investigation and meet preliminary requirements prior to onboarding. PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required. PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed). MOBILITY AGREEMENT: Appointees will be required to sign a Mobility Agreement. If you decline a position due to geographic location, you will receive no further consideration under this announcement. This agreement states that as a part of your developmental assignment, you may be assigned to any location within the Agency, and that you will move to the new duty location. Failure to relocate can be used as the basis for non-selection and failure to relocate after completion of your Individual Development Plan (IDP) can be the basis for your termination from the Federal service. SERVICE AGREEMENT: Appointees will be required to sign an agreement to continue in service upon completion of the development training and serve in the agency twice the length of the training period (approximately 24 months).
All applicants must meet the requirements under A or B to qualify for applying to an engineering position. A. Degree: Engineering To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive). Note: Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of the closing date of this announcement. If selected, the final transcript must be received before your start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
Little Rock, Arkansas
Phoenix, Arizona
Lakewood, Colorado
Washington, District of Columbia
Augusta, Maine
Lansing, Michigan
Bismarck, North Dakota
Trenton, New Jersey
Carson City, Nevada
Columbus, Ohio
Salem, Oregon
Harrisburg, Pennsylvania
Austin, Texas
Salt Lake City, Utah
Olympia, Washington
Vancouver, Washington
Full Time
For this announcement, applications will be reviewed to determine if the applicant meets the basic qualifications for this position. The applications of individuals who meet the basic qualifications will be assessed to validate that the applicant possesses the Knowledge, Skills, and Abilities (KSAs) at the level of proficiency needed to perform the job successfully. Applicants who are found to possess the necessary KSAs to perform the job may be referred to the selecting official for further consideration. This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. You may preview questions for this vacancy.
RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time (e.g., Program Analyst, GS-343-11 | January 2009–Present | 40 Hours/Week) and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to TRANSCRIPTS are REQUIRED as there is a stated education requirement for the series. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager. For more information, please review the OPM Employee's Guide to Career Transition. SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents by the closing date of the announcement. Note: You must review and verify that all files are successfully transferred to our system before final submission.
SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents no later than 11:59 (EST) by the closing date of the announcement. Note: Uploading documents to USAJobs does not automatically attach them to this application. You must review and verify that all files are successfully transferred to our system before final submission. Late or incomplete applications will be disqualified. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: Transjobs@dot.gov
The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, FairChanceAct@dot.gov. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation CURRENT OR FORMER FEDERAL APPLICANTS: You must submit SF-50(s) that verify your highest competitive grade, full performance level, and federal applicant eligibility. To prove you meet the 52-week time-in-grade requirement for the highest grade level requested, you must submit SF-50 documentation showing a sequential 52-week period. Box 4 of the SF-50 must show an effective date at least 52 weeks prior to the job announcement closing date. Do not submit an award SF-50 or a current-year pay adjustment SF-50, as these generally do not verify grade, eligibility, or the full 52-week requirement. To ensure your application passes HR validation, you are highly encouraged to combine and upload the following required SF-50 documents into a single PDF: • The SF-50 showing when you were originally appointed or promoted to your qualifying grade level (establishing the start of your 52-week timeline) OR subsequent SF-50 (such as a Within-Grade Increase, promotion, or award) dated at least 52 weeks later. Warning on Incomplete Documentation: Submitting only an annual general pay adjustment SF-50 or an award SF-50 by itself is insufficient, as these individual documents do not track or prove your original entry date into that grade. If your documentation fails to conclusively prove a full 52-week history at the next lower grade, you will be rated Ineligible for that tier. The incumbent will be appointed to the GS-7, GS-9, or GS-11 level depending on qualifications. This position is developmental: Incumbents at the GS-7 or GS-9 may be non-competitively promoted to the next higher grade upon completion of an Individual Development Plan (IDP), meeting time-in-grade requirements, and the recommended approval for promotion by their supervisor. SALARY RANGES: The following salary table is used for Civil Eng (Hwy) series: 2026 Special Rate Table 0414 - https://www.opm.gov/special-rates/2026/Table041401012026.aspx RECRUITMENT INCENTIVE: Recruitment incentive may be considered.
The United States federal government offers civilian positions across its agencies and offices.