Date shown in New York time. Confirm application timing on the official posting.
To apply for this position, you must submit a complete Application Package which includes: Starting on September 27, 2025, federal agencies will only accept resumes up to two pages in length to comply with the Merit Hiring Plan. USAJOBS will not allow you to upload or build resumes longer than two pages, and you will need to update the resumes in your profile before applying to a job. Two Page Resumes only. 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, civilian email address (no .gov or .mil) and current telephone number must be on your resume. Your resume must clearly demonstrate experience that meets the requirements of this position. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Your resume must show experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. 2. References must be submitted with the application packet. (Minimum of 3 references required). If no references are with the application packet, your application will not be sent forward to the selecting officials. 3. Prior/current Federal employees are required to submit their most recent SF 50 with their packet. The SF-50(s) must reflect the highest grade and step held in Federal Service that demonstrates one year time in grade. 4. A complete application package, including all supporting documents (i.e., resumes, copies of transcripts if required, licenses, All FAA Certifications and Credentials, and any other supporting documents etc.), must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. 5. Copies of transcripts must be provided at the time of submission with the application packet. Failure to do so will result in the applicant not being considered for the position. Selected individual may be required to provide official transcripts prior to placement into this position. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Human Resources WILL NOT divulge if you are qualified or not for the position. Incomplete packets will not be considered for the position.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13096160 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Confirm the deadline and all requirements on the official posting before applying.
Source: USAJOBS · Bespree is not the employer.
THIS IS A NATIONAL GUARD INDEFINITE TITLE 5 EXCEPTED SERVICE POSITION. This National Guard position is for a INTERDISCIPLINARY ENGINEER TITLE 5 PERMANENT, Position Description Number T5904800 and is part of the NH JFHQ NH J1, National Guard. This vacancy is to gather applications that may or may not result in a referral or selection.
The primary purpose of this position is to serve as a professional general engineer, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation. Performs planning, programming, and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of general engineering and knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs. Uses cost estimating tools to produce government estimates, program projects, and compete for funding in Air Force corporate processes. Provides consulting services and project coordination. Coordinates projects with other engineers in a variety of disciplines, architects, and planners as well as contracting officers, tenant organization representatives, and construction agents such as from private contracting companies or the US Army Corps of Engineers. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
The occupational series of this position is assigned as GS-801 or GS-808, GS-810, GS-819, GS-830 or GS-850, depending on the qualifications of the incumbent selected. GENERAL EXPERIENCE: See Education. SPECIALIZED EXPERIENCE: GS-12 - Must have 1-year equivalent to the next lower grade level (GS-11). Experience, education, or training in preparing technical and engineering drawings. Experience searching out and developing new or greatly modified methods and approaches to accomplish the Civil Engineering function. Experience in coordinating and negotiating with contractors and other personnel regarding engineering and administrative matters. Experience supervising and leading others within the Engineering Occupational Series.
Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A." B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
Newington, New Hampshire
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): General Engineering.
To apply for this position, you must submit a complete Application Package which includes: Starting on September 27, 2025, federal agencies will only accept resumes up to two pages in length to comply with the Merit Hiring Plan. USAJOBS will not allow you to upload or build resumes longer than two pages, and you will need to update the resumes in your profile before applying to a job. Two Page Resumes only. 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, civilian email address (no .gov or .mil) and current telephone number must be on your resume. Your resume must clearly demonstrate experience that meets the requirements of this position. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Your resume must show experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. 2. References must be submitted with the application packet. (Minimum of 3 references required). If no references are with the application packet, your application will not be sent forward to the selecting officials. 3. Prior/current Federal employees are required to submit their most recent SF 50 with their packet. The SF-50(s) must reflect the highest grade and step held in Federal Service that demonstrates one year time in grade. 4. A complete application package, including all supporting documents (i.e., resumes, copies of transcripts if required, licenses, All FAA Certifications and Credentials, and any other supporting documents etc.), must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. 5. Copies of transcripts must be provided at the time of submission with the application packet. Failure to do so will result in the applicant not being considered for the position. Selected individual may be required to provide official transcripts prior to placement into this position. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Human Resources WILL NOT divulge if you are qualified or not for the position. Incomplete packets will not be considered for the position.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13096160 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Candidates should be committed to improving the efficiency of the federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution." In addition, all job announcements now include a link to USAJOBS, Equal Employment Opportunity Policy, which affirms that candidates will not be hired based on their race, sex, color, religion, or national origin. This agency participates in the Fair Chance Act, Title 5 USC 9202 Limitations on requests for criminal history information. An employee of an agency may not request, in oral or written form (including through the Declaration for Federal Employment (Office of Personnel Management Optional Form 306) or any similar successor form, the USAJOBS internet website, or any other electronic means) that an applicant for an appointment to a position in the civil service disclose criminal history record information regarding the applicant before the appointing authority extends a conditional offer to the applicant. Certain exceptions do apply to this Act. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).
The United States federal government offers civilian positions across its agencies and offices.
Date shown in New York time. Confirm application timing on the official posting.
To apply for this position, you must submit a complete Application Package which includes: Starting on September 27, 2025, federal agencies will only accept resumes up to two pages in length to comply with the Merit Hiring Plan. USAJOBS will not allow you to upload or build resumes longer than two pages, and you will need to update the resumes in your profile before applying to a job. Two Page Resumes only. 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, civilian email address (no .gov or .mil) and current telephone number must be on your resume. Your resume must clearly demonstrate experience that meets the requirements of this position. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Your resume must show experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. 2. References must be submitted with the application packet. (Minimum of 3 references required). If no references are with the application packet, your application will not be sent forward to the selecting officials. 3. Prior/current Federal employees are required to submit their most recent SF 50 with their packet. The SF-50(s) must reflect the highest grade and step held in Federal Service that demonstrates one year time in grade. 4. A complete application package, including all supporting documents (i.e., resumes, copies of transcripts if required, licenses, All FAA Certifications and Credentials, and any other supporting documents etc.), must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. 5. Copies of transcripts must be provided at the time of submission with the application packet. Failure to do so will result in the applicant not being considered for the position. Selected individual may be required to provide official transcripts prior to placement into this position. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Human Resources WILL NOT divulge if you are qualified or not for the position. Incomplete packets will not be considered for the position.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13096160 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Confirm the deadline and all requirements on the official posting before applying.
Source: USAJOBS · Bespree is not the employer.
THIS IS A NATIONAL GUARD INDEFINITE TITLE 5 EXCEPTED SERVICE POSITION. This National Guard position is for a INTERDISCIPLINARY ENGINEER TITLE 5 PERMANENT, Position Description Number T5904800 and is part of the NH JFHQ NH J1, National Guard. This vacancy is to gather applications that may or may not result in a referral or selection.
The primary purpose of this position is to serve as a professional general engineer, performing design, project programming, construction management/monitoring duties and improvement projects of real property facilities and infrastructure, including utility systems in support of a military installation. Performs planning, programming, and design work for substantial multi-phase new construction, renovations, and improvement projects for real property facilities, including utility systems, utilizing a professional knowledge of engineering. Manages projects for new construction, renovations, and improvements to real property facilities and maintains surveillance over construction contractors utilizing a professional knowledge of general engineering and knowledge of architecture to ensure overall compliance with contracted specifications, schedules, etc. Plans, programs, budgets, and executes required projects in support of assigned programs. Uses cost estimating tools to produce government estimates, program projects, and compete for funding in Air Force corporate processes. Provides consulting services and project coordination. Coordinates projects with other engineers in a variety of disciplines, architects, and planners as well as contracting officers, tenant organization representatives, and construction agents such as from private contracting companies or the US Army Corps of Engineers. Collects data and evaluates factors which affect the application of concepts, principles, theories, and methods required to observe, examine, measure, analyze, map, and describe physical and technical features and phenomena. Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
The occupational series of this position is assigned as GS-801 or GS-808, GS-810, GS-819, GS-830 or GS-850, depending on the qualifications of the incumbent selected. GENERAL EXPERIENCE: See Education. SPECIALIZED EXPERIENCE: GS-12 - Must have 1-year equivalent to the next lower grade level (GS-11). Experience, education, or training in preparing technical and engineering drawings. Experience searching out and developing new or greatly modified methods and approaches to accomplish the Civil Engineering function. Experience in coordinating and negotiating with contractors and other personnel regarding engineering and administrative matters. Experience supervising and leading others within the Engineering Occupational Series.
Basic Requirements: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A." B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
Newington, New Hampshire
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): General Engineering.
To apply for this position, you must submit a complete Application Package which includes: Starting on September 27, 2025, federal agencies will only accept resumes up to two pages in length to comply with the Merit Hiring Plan. USAJOBS will not allow you to upload or build resumes longer than two pages, and you will need to update the resumes in your profile before applying to a job. Two Page Resumes only. 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, civilian email address (no .gov or .mil) and current telephone number must be on your resume. Your resume must clearly demonstrate experience that meets the requirements of this position. In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Your resume must show experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (Mo/Yr), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. 2. References must be submitted with the application packet. (Minimum of 3 references required). If no references are with the application packet, your application will not be sent forward to the selecting officials. 3. Prior/current Federal employees are required to submit their most recent SF 50 with their packet. The SF-50(s) must reflect the highest grade and step held in Federal Service that demonstrates one year time in grade. 4. A complete application package, including all supporting documents (i.e., resumes, copies of transcripts if required, licenses, All FAA Certifications and Credentials, and any other supporting documents etc.), must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. 5. Copies of transcripts must be provided at the time of submission with the application packet. Failure to do so will result in the applicant not being considered for the position. Selected individual may be required to provide official transcripts prior to placement into this position. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Human Resources WILL NOT divulge if you are qualified or not for the position. Incomplete packets will not be considered for the position.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13096160 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Candidates should be committed to improving the efficiency of the federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution." In addition, all job announcements now include a link to USAJOBS, Equal Employment Opportunity Policy, which affirms that candidates will not be hired based on their race, sex, color, religion, or national origin. This agency participates in the Fair Chance Act, Title 5 USC 9202 Limitations on requests for criminal history information. An employee of an agency may not request, in oral or written form (including through the Declaration for Federal Employment (Office of Personnel Management Optional Form 306) or any similar successor form, the USAJOBS internet website, or any other electronic means) that an applicant for an appointment to a position in the civil service disclose criminal history record information regarding the applicant before the appointing authority extends a conditional offer to the applicant. Certain exceptions do apply to this Act. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)).
The United States federal government offers civilian positions across its agencies and offices.